詳細信息
彎管機
發表時間：2017-2-21 14:49:35 閱讀次數：
DW-50CNC x 2A-1S
CNC控制液壓彎管機
CNC HYDRAULIC PIPE BENDING MACHINE
■彎管采用伺服驅動，強勁有力；
■轉角及送料為伺服電機驅動，迅速、準確；
■同時儲存多組加工程序，并可靈活切換，方便了品種繁多的產品加工，大大提高了生產效率；
■具有自動檢測錯誤及故障的功能，當出現任何非正常動作或有任何危險存在時機器會立即停機并發出異警，幫助操作者排除故障；
■特別適用于空間角度多且精度要求高的管件加工。如：汽車油管、空調管、摩托車自行車等車架的生產制作。
■Bending pipe with hydraulic drive,strong power.
■The drive of rotating angle and feeding with servo motor, rapid and
accurate.
■The same time storaging of multi group processing procedures, and can be
flexible to switch, convenient for a wide variety of product processing, greatly
improving the production efficiency.
■Automatic detecting error and fault function, the machine will immediately
stop and send out false alarm when there is any abnormal action or any danger
exists,to help the operator troubleshooting.
■Especially suitable for high precise and high accuracy pipe processing.
Such asautomotive tubing, air conditioning pipe, motorcycle bicycle and other
frame production.
1、電控系統：采用日本知名控制器，例如：三菱會社或安川出品的伺服驅動器、伺服馬達、定位模組、CPU等，性能強，穩定性佳；
2、三菱超大型CPU可容納多組的檔案編輯。每一檔案可設定20個彎管角度，記憶體可儲放多組檔案；
3、工業用電腦型內裝WINDOWS作業系統與三菱伺服系統搭配（選用）；
4、具自動偵測錯誤及故障功能，并在熒幕顯示，讓操作者容易排除障礙；
5、所有加工資料都由觸控?zé)赡惠斎耄?
6、每一彎管皆可因不同材質變化設定補償值、速度、脫模間隙；
7、同一支管子每一彎皆可單獨編寫5個動作順序、10段速度，讓操作者搭配使用，提高工作效率、降低管件干涉點；
8、觸控?zé)赡豢芍杏⑽那袚Q。顯示他國語言亦可依需求訂購；
9、送料方式可因不同需求選擇直送或夾送；
10、可將XYZ座標自動轉換成YBC加工值；
11、資料經編輯完成后，有鑰匙保護，防止資料被任意修改；
1、The electric control system is the Japanese famous controller.For example
servo driver,servo motor,positioning module,CPU and other produced by Mitsubishi
clubs or Yaskawa,strong performance and good stability.
2、Mitsubishi super large CPU can accommodate many groups of file
editing.Each file can be set at 20 angles,memory can store many sets of
files.
3、Industrial computer based WINDOWS operating system and MITSUBISHI servo
system.
4、With automatic detection error and fault function,and in the screen
display,so that the operator easy to remove obstacles.
5、All processing information by the touching screen input.
6、Each bending pipe can set the compensation value, speed, release gap
according to different materials.
7、A pipe per bending all individually prepare five action sequence and 10
speed,allows the operator to match the use,improve work efficiency,reduce the
fitting interference points.
8、Touching screen can be switched in English & Chinese.It can also be
ordered in other language according with the requirements.
9、Feeding mode can be chosen to send or clip with different needs.
10、XYZ coordinate can be automatically converted into YBC value.
11、It has the key to protect after the information is edited,prevent data
were arbitrarily modified.
上一篇文章：無上一條
下一篇文章：彎管機